What is H62 Brass Sheet 0.6mm?

H62 brass is a binary copper-zinc alloy containing approximately 60.5%–63.5% copper, with zinc as the primary remaining element.

This composition gives H62 brass excellent: mechanical strength, formability ,corrosion resistance,thermal conductivity

When rolled into 0.6 mm thin sheets, the material enters the category of precision brass sheet or brass strip, requiring advanced cold-rolling technology and strict thickness tolerance control.

Equivalent International Standards

These equivalents make H62 brass a globally recognized industrial alloy widely used in electronics, mechanical manufacturing and decorative applications.

Chemical Composition of H62 Brass

The chemical composition of H62 brass sheet is strictly controlled to maintain stable mechanical properties.

The relatively high copper content ensures good plasticity and corrosion resistance, while zinc improves strength and hardness.

Technical Specifications of 0.6mm H62 Brass Sheet

Below are the typical technical parameters for cold-rolled H62 brass sheet with a thickness of 0.6 mm.

These properties allow H62 brass sheets to maintain excellent structural performance even in ultra-thin thicknesses.

Mechanical Properties and Processing Advantages

H62 brass offers excellent cold and hot working performance, which makes it suitable for multiple industrial processing methods.

Excellent Cold Formability

The alloy exhibits high ductility, allowing:deep drawing,Bending,Stamping,Rolling,

This makes 0.6 mm brass sheet ideal for precision stamping parts.

High Strength-to-Thickness Ratio

Even at ultra-thin thickness, H62 brass can achieve tensile strengths up to 600 MPa, providing reliable structural performance.

Good Corrosion Resistance

H62 brass performs well in:atmospheric environments,freshwater conditions,light industrial environments,

This makes it suitable for both functional components and decorative applications.

Micro Welding Performance for Ultra-Thin Brass Sheets

For 0.6 mm brass sheets, modern manufacturing often uses micro friction stir welding (μFSW).

Research shows that optimized μFSW parameters can produce weld joints with tensile strength reaching approximately 92.5% of the base material, around 370 MPa.

Advantages of μFSW include:low distortion,minimal heat-affected zone,high joint reliability,

These properties make H62 thin sheets ideal for:electronic packaging,aerospace micro-structures,precision energy components,

Industrial Applications of H62 Brass Sheet 0.6mm

Thanks to its excellent balance of strength, conductivity and workability, H62 brass sheet is widely used across multiple industries.

Electronics and Electrical Industry

Typical components include:electrical terminals,connector contacts,switch components,battery connectors,heat dissipation plates,

Precision Mechanical Manufacturing

Common mechanical uses include:precision washers,Rivets,Pins,Springs,instrument components,

Heat Transfer and Cooling Components

Due to good thermal conductivity, H62 brass sheets are also used in:radiator fins,heat exchanger components,cooling plates,

Decorative and Architectural Applications

The attractive golden appearance of brass makes it ideal for:decorative panels,architectural trims,metal crafts,luxury interior elements,

H62 Brass Sheet Temper Conditions

H62 brass sheets are typically supplied in different temper conditions depending on the application.

Selecting the right temper ensures optimal forming performance and mechanical strength.

B2B Purchasing Guide for H62 Brass Sheet

When sourcing 0.6 mm H62 brass sheets, buyers should evaluate several critical factors.

Material Certification

Reliable suppliers should provide:

Mill Test Certificate (MTC)

compliance with GB/T 5231, ASTM or JIS standards

verified chemical composition

Thickness Tolerance

Ultra-thin sheets require strict tolerance control.

Typical tolerance: ±0.02 mm

Flatness and surface quality should also be inspected to avoid defects such as scratches or oxidation.

Surface Condition

Different applications require different finishes:bright polished surface,matte surface,pickled surface,coated or plated surfaces,

Packaging for Export

Thin brass sheets must be properly protected during shipping.

Standard export packaging includes:moisture-proof paper,plastic protection film,fumigation wooden cases (ISPM-15),

This prevents oxidation and mechanical damage during long-distance transportation.

Custom Processing Services

Many manufacturers provide value-added processing services such as:precision cutting,coil slitting,custom sheet sizes,stamping blanks,surface finishing,

These services can significantly improve production efficiency for OEM manufacturers.

FAQ – H62 Brass Sheet

What is the difference between H62 and H65 brass?

H62 contains slightly less copper than H65, resulting in higher strength but slightly lower ductility.

Is H62 brass suitable for stamping?

Yes. H62 brass offers excellent cold-working performance, making it ideal for precision stamping and deep drawing.

Can H62 brass sheet be welded?

Yes. It can be welded using micro friction stir welding, resistance welding and brazing techniques.

What industries commonly use 0.6 mm brass sheets?

Typical industries include:electronics manufacturing,automotive components,precision instruments,architectural decoration,

Reliable H62 Brass Sheet Supplier

If you are looking for a reliable H62 brass sheet supplier, selecting a manufacturer with strong production capabilities and strict quality control is essential.

Professional suppliers can provide:

precision cold-rolled brass sheets

customized thickness and dimensions

mill test certificates

global export packaging

fast international delivery

Contact us today to request a quotation or sample for testing.

Our team can help you select the most suitable H62 brass sheet solution for your project.

Telephone: +86 14737199137

Email: info@qsfullmetal.com

Learn how we serve our global customers

Start your partnership journey

Explore our international capabilities

Browse our Alibaba International Station

Experience the charm of our social media