PRODUCTS
Position: Home > Products > 4×8 Aluminum Sheet
http://4X8%20ALUMINUM%20SHEET%204
http://4X8%20ALUMINUM%20SHEET%202
http://4X8%20ALUMINUM%20SHEET%201
http://4X8%20ALUMINUM%20SHEET
http://4X8%20ALUMINUM%20SHEET%203
http://4X8%20ALUMINUM%20SHEET%204
http://4X8%20ALUMINUM%20SHEET%202
http://4X8%20ALUMINUM%20SHEET%201
http://4X8%20ALUMINUM%20SHEET
http://4X8%20ALUMINUM%20SHEET%203

4×8 Aluminum Sheet

4x8 aluminum sheet refers to an aluminum plate with a length of 8cm and a width of 4cm. It is usually an aluminum alloy, of which 5052 aluminum alloy is the most commonly used. This aluminum alloy has good corrosion resistance and processing properties and is suitable for a variety of application scenarios. Aluminum plates of this specification are mainly used to make various aluminum alloy doors and windows, curtain walls, decorative materials, etc.
Product Name: 4x8 aluminum sheet
Temper: O-H112, T3-T8, T351-T851, H111, H112, H12-H18, H22-H28, H32-H38 etc.
Grade: 1000 Series, 2000 Series, 3000 Series, 4000 Series, as per requirement
Surface: Anodized, mirror polishing, spraying, color coating, embossing, diamond pattern punching, laser engraving, etc.
Thickness: 1/16″, 1/8″, 3/16″, 1/4″;0.2-350mm;12 gauge, 14 gauge, 16gauge, etc.
Sizw: 1220 mm x 2440 mm, 1000 mm x 60610 mm, 60610 mm x 60610 mm, 1500 mm x 3000 mm, 60610 mm x 4000 mm
MOQ: 1 Ton
Customized
Original Factory Warranty
Original Factory Warranty
Global Shipping
contact us

    Introduction

    The chemical properties of 4×8 aluminum plate are as follows:

    The 4×8 aluminum sheet is an aluminum alloy. The main alloying elements are magnesium and silicon, and form the Mg2Si phase. Due to the high magnesium content (2.5~4.5%), the Mg2Si strengthening phase is formed, which improves the strength of the aluminum plate. It has good corrosion resistance, weldability and bending performance. At the same time, its low temperature performance and cold workability are also very good.

    What is the hardness of 4×8 aluminum plate?

    The hardness of 4×8 aluminum sheets varies depending on the material and processing technology. Generally speaking, unhardened aluminum plates have lower hardness, while hardened aluminum plates have higher hardness.

    The hardness of unhardened aluminum plates is usually in the range of 80-100HB. The hardness of 4×8 aluminum plates that have been hardened (such as T6 treated) can reach 110-130HB or even higher.

    When choosing 4×8 aluminum plates, you need to pay attention to the following points:

    Surface treatment: There are many surface treatments for 4×8 aluminum sheets, including anodizing, spraying, electroplating, etc. Different surface treatment methods will affect the corrosion resistance, wear resistance and aesthetics of aluminum plates.

    Thickness: The thickness of the 4×8 aluminum plate is also one of the factors that needs to be considered. Generally speaking, the thicker the aluminum plate, the stronger it will be, but the weight will also increase accordingly. The appropriate thickness needs to be selected based on the actual application scenario.

    Quality: When choosing 4×8 aluminum plates, you need to choose manufacturers and products with reliable quality. The quality of the product can be evaluated by viewing the product’s quality inspection report, quality management system certification, etc.

    In short, there are many factors to consider when choosing a suitable 4×8 aluminum plate, including material, surface treatment, thickness and quality. Appropriate specifications and models need to be selected based on actual application scenarios.

    Display

    5083 Aluminum sheet

    Application

    Main application areas:

    In building decoration: used to make various aluminum alloy doors, windows, curtain walls, decorative materials, etc., with the advantages of beauty, durability, and anti-corrosion.

    In transportation: it is widely used to make exterior coverings and interior decoration parts for various means of transportation, such as cars, trains, airplanes, etc.

    In electronic and electrical appliances: used in making shells and internal structural parts of various electronic and electrical products, such as mobile phones, TVs, refrigerators, etc.

    In industrial manufacturing: used to manufacture shells and internal structural parts of various industrial products, such as mechanical parts, automobile parts, etc.

    application2


    Packing
    http://packing
    why choose us
    http://Quanshuo%20Metal%20Materials
    http://Quanshuo%20Metal%20Materials
    http://Quanshuo%20Metal%20Materials

    Quanshuo Metal Materials Co., Ltd. is a leading supplier of steel and other metal products in China. As an ISO9001:2015 certified enterprise, the products we produce meet the standards of ASTM, AISI, BS, DIN, JIS, etc.



    Competitive Price
    Competitive Price
    7*24 service
    7*24 service
    Reliability
    Reliability
    Customized
    Customized
    Manufacturer
    Manufacturer
    FAQ
    How long does it usually take for me to receive a reply when I send an inquiry?
    In general, there are several situations for sending an inquiry: 1. Beijing time 9:00-18:00: We will wait for the website, reply within 15s after receiving your informa……
    Are you Factory?
    Q: Do you have your own steel production workshop? A: Yes, we have our own steel production workshop equipped with modern mechanical equipment.   Q: What type of s……
    Do you have MOQ?
    1. Q: Do you have a minimum order quantity (MOQ)? A: Yes, we do have a Minimum Order Quantity (MOQ) requirement. Our company has minimum order quantity requirements for……
    +86 13027616811
    +86 13027616811
    info@qsfullmetal.com
    Inquiry

      Name

      Email

      Phone

      Messages