PRODUCTS
Position: Home > Products > Hot Rolled Carbon Steel Coil
http://hrc%20display-5
http://hrc%20display-4
http://hrc%20display-3
http://hrc%20display-2
http://hrc%20display-1
http://hrc%20display-5
http://hrc%20display-4
http://hrc%20display-3
http://hrc%20display-2
http://hrc%20display-1

Hot Rolled Carbon Steel Coil

Hot Rolled Carbon Steel Coil is a steel product in the form of a coiled steel strip produced from the hot rolling process in the Hot Strip Mill facility. Hot rolling is a mill process that involves rolling the steel at a high temperature (typically at a temperature over 1700° F), which is above the steel’s recrystallization temperature. When steel is above the recrystallization temperature, it can be shaped and formed quickly, and the steel can be made in much larger sizes. Hot-rolled steel is typically cheaper than cold-rolled steel due to the fact that it is often manufactured without any delays in the process, and therefore the reheating of the steel is not required (as it is with cold-rolled). When the steel cools off it will shrink slightly thus giving less control on the size and shape of the finished product when compared to cold rolled.
Commodity: Hot Rolled Carbon Steel Coil
Standard: ASTM, AISI, BS, DIN, EN, GB, JIS
Grade: Q195, Q215, Q235, Q255, Q275, Q345
Thickness: 2-60mm
Width: 1250-2000mm
Surface: Mild steel plain finish, Hot dip galvanized, Color coated
Application: Building construction, Bridge, Architecture
MOQ: 1 Ton
Customized
Original Factory Warranty
Original Factory Warranty
Global Shipping
contact us

    Introduction

    Hot rolled steel is carbon steel that is heated above the recrystallization point (typically 1,700°F or above), flattened to the desired size and thickness by high speed rolls, and processed into the necessary shape (e.g. Strip, Pipe, Bar, Plate, Sheet).
    Hot-rolled carbon steel coils are widely used in welded pipes, steel structures, cable trays, shelves, hardware, machinery, electrical cabinets, vehicles and other industries.
    Hot rolled carbon steel is carbon steel that has been roll-pressed at very high temperatures—over 1,700˚F, which is above the re-crystallization temperature for most steels. This makes the steel easier to form, resulting in products that are easier to work with.
    To process hot rolled steel, manufacturers first start with a large, rectangular length of metal, called a billet. The billet is heated and then sent for pre-processing, where it is flattened into a large roll. From there, it is kept at a high temperature and run through a series of rollers to achieve its finished dimensions. The white-hot strands of steel are pushed through the rollers at high speeds. For sheet metal, rolled steel is spun into coils and left to cool. For other forms, such as bars or plates, materials are sectioned and packaged.

    Detailed
    HRC Details-1

    HRC Details-1

    Hot-rolled carbon steel can often be identified by the following characteristics:
    A scaled surface—a remnant of cooling from extreme temperatures;
    Slightly rounded edges and corners for bar and plate products (due to shrinkage and less precise finishing);
    Slight distortions, where cooling may result in slightly trapezoidal forms, as opposed to perfectly squared angles.

    Hot-rolled carbon steel typically requires much less processing than cold-rolled carbon steel, which makes it a lot cheaper. Because hot rolled steel is allowed to cool at room temperature, it’s essentially normalized—meaning it’s free from internal stresses that can arise from quenching or work-hardening processes.

    Application

    Applications of Hot Rolled Carbon Steel Coil:

    Coil spring
    High Strength Parts (High Carbon)
    Hard and Durable Components
    Knives
    Screwdriver
    Hammer
    Construction project
    Wall tie
    Spring clip


    http://Applications%20of%20carbon%20steel%20strip
    Advantages
    http://advantages%20of%20hot%20rolled%20carbon%20steel%20coil
    why choose us
    http://Quanshuo%20Metal%20Materials
    http://Quanshuo%20Metal%20Materials
    http://Quanshuo%20Metal%20Materials

    Quanshuo Metal Materials Co., Ltd. is a leading supplier of steel and other metal products in China. As an ISO9001:2015 certified enterprise, the products we produce meet the standards of ASTM, AISI, BS, DIN, JIS, etc.



    Competitive Price
    Competitive Price
    7*24 service
    7*24 service
    Reliability
    Reliability
    Customized
    Customized
    Manufacturer
    Manufacturer
    FAQ
    How long does it usually take for me to receive a reply when I send an inquiry?
    In general, there are several situations for sending an inquiry: 1. Beijing time 9:00-18:00: We will wait for the website, reply within 15s after receiving your informa……
    Are you Factory?
    Q: Do you have your own steel production workshop? A: Yes, we have our own steel production workshop equipped with modern mechanical equipment.   Q: What type of s……
    Do you have MOQ?
    1. Q: Do you have a minimum order quantity (MOQ)? A: Yes, we do have a Minimum Order Quantity (MOQ) requirement. Our company has minimum order quantity requirements for……
    +86 13027616811
    +86 13027616811
    info@qsfullmetal.com
    Inquiry

      Name

      Email

      Phone

      Messages